Iimveliso
Imodyuli yesimo se-MEMs
Intshayelelo yeMveliso
Imodyuli yokulinganisa i-XC-AHRS-M13 MEMS inokulinganisa i-angle yokuqengqeleka, i-engile ye-pitch, kunye necala lomthwali kunye nesiphumo ngexesha lokwenyani. Lo mzekelo uneempawu zobukhulu obuncinci, ukusetyenziswa kwamandla aphantsi, ubunzima bokukhanya, kunye nokuthembeka okulungileyo, okunokuhlangabezana neemfuno zesicelo semimandla ehambelanayo.
Iimpawu zemveliso
● Ixesha elifutshane lokuqalisa.
● Ukuhluzwa kwedijithali kunye ne-algorithms yembuyekezo yabenzi boluvo.
● Umthamo omncinci, ukusetyenziswa kwamandla aphantsi, ubunzima obulula, i-interface elula, kulula ukuyifaka kunye nokusetyenziswa.
Iifayile zesicelo
● XX umqeqeshi
● Iqonga lokuzinzisa i-Optical
IiParameters zokuSebenza kweMveliso
| imveliso Model | Imodyuli yeSimo seMEMS | ||||
| Umzekelo weMveliso | XC-AHRS-M13 | ||||
| Udidi lweMetric | Igama leMetric | Umgangatho wokuSebenza | Amagqabantshintshi | ||
| Ukuchaneka kwesimo sengqondo | kunjalo | 1°(RMS) | |||
| I-pitch | 0.5°(RMS) | ||||
| Roll | 0.5°(RMS) | ||||
| igyroscope | Uluhlu | ±500°/s | |||
| Umlinganiselo opheleleyo womlinganiselo wobushushu awukho mgca | ≤200ppm | ||||
| Umnqamlezo-ukudibanisa | ≤1000ppm | ||||
| Icala (ubushushu obugcweleyo) | ≤±0.02°/s | (Indlela yokuvavanya umgangatho womkhosi wesizwe) | |||
| Uzinzo olunomkhethe | ≤5°/h | (1σ, 10s mtyibilizi, ubushushu obugcweleyo) | |||
| Zero-biased ukuphinda-phinda | ≤5°/h | (1σ, ubushushu obupheleleyo) | |||
| Ububanzi (-3dB) | ＞200Hz | ||||
| i-accelerometer | Uluhlu | ±30g | Ubuninzi ± 50g | ||
| Umnqamlezo-ukudibanisa | ≤1000ppm | ||||
| Icala (ubushushu obugcweleyo) | ≤2mg | Ubushushu obugcweleyo | |||
| Uzinzo olunomkhethe | ≤0.2mg | (1σ, 10s mtyibilizi, ubushushu obugcweleyo) | |||
| Zero-biased ukuphinda-phinda | ≤0.2mg | (1σ, ubushushu obupheleleyo) | |||
| Ububanzi (-3dB) | ＞100Hz | ||||
| Iimpawu zesiNxulumanisi | |||||
| Uhlobo lwesinxibelelanisi | RS-422 | Ireyithi yeBaud | 38400bps(inokwenziwa ngokwezifiso) | ||
| Ubume beDatha | 8 Isuntswana ledatha, i-1 yokuqala, i-1 yokuyeka, akukho kukhangela okungalungiswanga | ||||
| Ireyithi yohlaziyo lwedatha | 50Hz(inokwenziwa ngokwezifiso) | ||||
| Ukuguquguquka kokusingqongileyo | |||||
| Uluhlu lobushushu obusebenzayo | -40℃～+75℃ | ||||
| Uluhlu lobushushu bokugcina | -55℃～+85℃ | ||||
| Ukungcangcazela (g) | 6.06gms, 20Hz ~ 2000Hz | ||||
| Iimpawu zoMbane | |||||
| Umbane wokufaka (DC) | +5VC | ||||
| Iimpawu zoMzimba | |||||
| Ubungakanani | 56mm×48mm×29mm | ||||
| Ubunzima | ≤120g | ||||
- Ubungakanani kunye noLwakhiwo lunokwenziwa ngokwezifiso
- Izalathisi zigubungela udederhu olupheleleyo ukusuka koPhantsi ukuya koPhezulu
- Amaxabiso aphantsi kakhulu
- Ixesha elifutshane loNikezo kunye neNgxelo ngexesha elifanelekileyo
- Uphando lweNtsebenziswano lweZikolo noShishino luphuhlisa ubume
- I-Automatic Patch kunye ne-Assembly Line
- ILebhu yoxinzelelo lokusingqongileyo eyeyakho
